Marpol 73/78 amendment 2001

International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (MARPOL 73/78)

Introduction
History of MARPOL 73/78
OILPOL Convention
Torrey Canyon
1973 Convention
1978 Conference
Annex I: Prevention of pollution by oil
Annex II: Control of pollution by noxious liquid substances
Annex III: Prevention of pollution by harmful substances in packaged form
Annex IV: Prevention of pollution by sewage from ships
Annex VI: Prevention of Air Pollution from Ships
Enforcement
Amendment Procedure
The 1984 amendments
The 1985 (Annex II) amendments
The 1985 (Protocol I) amendments – incident reporting
The 1987 amendments - special area extension
The 1989 (March) amendments – Annex II
The October 1989 amendments – North Sea special area
The 1990 (HSSC) amendments
The 1990 (IBC Code) amendments
The 1990 (BCH) amendments
The 1990 (Annexes I and V) amendments – Antarctic as special area
The 1991 amendments – Wider Caribbean as special area
The 1992 amendments – Double hulls made mandatory
The 1994 amendments - Implementation
The 1995 amendments – Garbage records
The 1996 amendments
The 1997 amendments – North West European waters as special area
The Protocol of 1997 adoption of Annex VI - Regulations for the Prevention of Air
Pollution from Ships
The 1999 amendments – Persistent oil
The 2000 amendments – Deletion of tainting
The 2001 amendments - revised 13 G (double hulls)


Introduction
The MARPOL Convention is the main international convention covering prevention of pollution of the marine environment by ships from operational or accidental causes. It is a combination of two treaties adopted in 1973 and 1978 respectively and updated by amendments through the years.
The International Convention for the Prevention of Pollution from Ships (MARPOL) was adopted on 2 November 1973 at IMO and covered pollution by oil, chemicals, harmful substances in packaged form, sewage and garbage. The Protocol of 1978 relating to the 1973 International Convention for the Prevention of Pollution from Ships (1978 MARPOL Protocol) was adopted at a Conference on Tanker Safety and Pollution Prevention in February 1978 held in response to a spate of tanker accidents in 1976-1977. (Measures relating to tanker design and operation were also incorporated into a Protocol of 1978 relating to the 1974 Convention on the Safety of Life at Sea, 1974).
As the 1973 MARPOL Convention had not yet entered into force, the 1978 MARPOL Protocol absorbed the parent Convention. The combined instrument is referred to as the International Convention for the Prevention of Marine Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (MARPOL 73/78), and it entered into force on 2 October 1983 (Annexes I and II).
The Convention includes regulations aimed at preventing and minimizing pollution from ships - both accidental pollution and that from routine operations - and currently includes six technical Annexes:
Annex I Regulations for the Prevention of Pollution by Oil
Annex II Regulations for the Control of Pollution by Noxious Liquid Substances in Bulk
Annex III Prevention of Pollution by Harmful Substances Carried by Sea in Packaged Form
Annex IV Prevention of Pollution by Sewage from Ships (entry into force date 27 September 2003)
Annex V Prevention of Pollution by Garbage from Ships
Annex VI Prevention of Air Pollution from Ships (adopted September 1997 - not yet in force)
States Parties must accept Annexes I and II, but the other Annexes are voluntary.

History of MARPOL 73/78
Oil pollution of the seas was recognized as a problem in the first half of the 20th century and various countries introduced national regulations to control discharges of oil within their territorial waters. In 1954, the United Kingdom organized a conference on oil pollution which resulted in the adoption of the International Convention for the Prevention of Pollution of the Sea by Oil (OILPOL), 1954. Following entry into force of the IMO Convention in 1958, the depository and Secretariat functions in relation to the Convention were transferred from the United Kingdom Government to IMO.

OILPOL Convention
The 1954 Convention, which was amended in 1962, 1969 and 1971, primarily addressed pollution resulting from routine tanker operations and from the discharge of oily wastes from machinery spaces - regarded as the major causes of oil pollution from ships.
The 1954 OILPOL Convention, which entered into force on 26 July 1958, attempted to tackle the problem of pollution of the seas by oil - defined as crude oil, fuel oil, heavy diesel oil and lubricating oil - in two main ways:
it established "prohibited zones" extending at least 50 miles from the nearest land in which the discharge of oil or of mixtures containing more than 100 parts of oil per million was forbidden;
it required Contracting Parties to take all appropriate steps to promote the provision of facilities for the reception of oily water and residues.
In 1962, IMO adopted amendments to the Convention which extended its application to ships of a lower tonnage and also extended the "prohibited zones". Amendments adopted in 1969 contained regulations to further restrict operational discharge of oil from oil tankers and from machinery spaces of all ships.
Although the 1954 OILPOL Convention went some way in dealing with oil pollution, growth in oil trade and developments in industrial practices were beginning to make it clear that further action, was required. Nonetheless, pollution control was at the time still a minor concern for IMO, and indeed the world was only beginning to wake up to the environmental consequences of an increasingly industrialised society.

Torrey Canyon
In 1967, the tanker Torrey Canyon ran aground while entering the English Channel and spilled her entire cargo of 120,000 tons of crude oil into the sea. This resulted in the biggest oil pollution incident ever recorded up to that time. The incident raised questions about measures then in place to prevent oil pollution from ships and also exposed deficiencies in the existing system for providing compensation following accidents at sea.
First, IMO called an Extraordinary session of its Council, which drew up a plan of action on technical and legal aspects of the Torrey Canyon incident. Then, the IMO Assembly decided in 1969 to convene an international conference in 1973 to prepare a suitable international agreement for placing restraints on the contamination of the sea, land and air by ships.
In the meantime, in 1971, IMO adopted further amendments to OILPOL 1954 to afford additional protection to the Great Barrier Reef of Australia and also to limit the size of tanks on oil tankers, thereby minimizing the amount of oil which could escape in the event of a collision or stranding.

1973 Convention
Finally, an international Conference in 1973 adopted the International Convention for the Prevention of Pollution from Ships. While it was recognized that accidental pollution was spectacular, the Conference considered that operational pollution was still the bigger threat. As a result, the 1973 Convention incorporated much of OILPOL 1954 and its amendments into Annex I, covering oil.
But the Convention was also intended to address other forms of pollution from ships and therefore other annexes covered chemicals, harmful substances carried in packaged form, sewage and garbage. The 1973 Convention also included two Protocols dealing with Reports on Incidents involving Harmful Substances and Arbitration.
The 1973 Convention required ratification by 15 States, with a combined merchant fleet of not less than 50 percent of world shipping by gross tonnage, to enter into force. By 1976, it had only received three ratifications - Jordan, Kenya and Tunisia - representing less than one percent of the world's merchant shipping fleet. This was despite the fact that States could become Party to the Convention by only ratifying Annexes I (oil) and II (chemicals). Annexes III to V, covering harmful goods in packaged form, sewage and garbage, were optional.
It began to look as though the 1973 Convention might never enter into force, despite its importance.

1978 Conference
In 1978, in response to a spate of tanker accidents in 1976-1977, IMO held a Conference on Tanker Safety and Pollution Prevention in February 1978. The conference adopted measures affecting tanker design and operation, which were incorporated into both the Protocol of 1978 relating to the 1974 Convention on the Safety of Life at Sea (1978 SOLAS Protocol) and the Protocol of 1978 relating to the 1973 International Convention for the Prevention of Pollution from Ships (1978 MARPOL Protocol) - adopted on 17 February 1978.
More importantly in terms of achieving the entry into force of MARPOL, the 1978 MARPOL Protocol allowed States to become Party to the Convention by first implementing Annex I (oil), as it was decided that Annex II (chemicals) would not become binding until three years after the Protocol entered into force.
This gave States time to overcome technical problems in Annex II, which for some had been a major obstacle in ratifying the Convention.
As the 1973 Convention had not yet entered into force, the 1978 MARPOL Protocol absorbed the parent Convention. The combined instrument - the International Convention for the Prevention of Marine Pollution from Ships, 1973 as modified by the Protocol of 1978 relating thereto (MARPOL 73/78) - finally entered into force on 2 October 1983 (for Annexes I and II).
Annex V, covering garbage, achieved sufficient ratifications to enter into force on 31 December 1988, while Annex III, covering harmful substances carried in packaged form, entered into force on 1 July 1992. Annex IV, covering sewage, enters into force on 27 September 2003. Annex VI, covering air pollution, was adopted in September 1997 and has also not yet entered into force.

Annex I: Prevention of pollution by oil
Entry into force: 2 October 1983
The 1973 Convention maintained the oil discharge criteria prescribed in the 1969 amendments to the 1954 Oil Pollution Convention, without substantial changes, namely:
Operational discharges of oil from tankers are allowed only when all of the following conditions are met:
1. the total quantity of oil which a tanker may discharge in any ballast voyage whilst under way must not exceed 1/15,000 of the total cargo carrying capacity of the vessel;
2. the rate at which oil may be discharged must not exceed 60 litres per mile travelled by the ship; and
3. no discharge of any oil whatsoever must be made from the cargo spaces of a tanker within 50 miles of the nearest land.
An oil record book is required, in which is recorded the movement of cargo oil and its residues from loading to discharging on a tank-to-tank basis.
In addition, in the 1973 Convention, the maximum quantity of oil permitted to be discharged on a ballast voyage of new oil tankers was reduced from 1/15,000 of the cargo capacity to 1/30,000 of the amount of cargo carried. These criteria applied equally both to persistent (black) and non persistent (white) oils.
As with the 1969 OILPOL amendments, the 1973 Convention recognized the "load on top" (LOT) system which had been developed by the oil industry in the 1960s. On a ballast voyage the tanker takes on ballast water (departure ballast) in dirty cargo tanks. Other tanks are washed to take on clean ballast. The tank washings are pumped into a special slop tank. After a few days, the departure ballast settles and oil flows to the top. Clean water beneath is then decanted while new arrival ballast water is taken on. The upper layer of the departure ballast is transferred to the slop tanks. After further settling and decanting, the next cargo is loaded on top of the remaining oil in the slop tank, hence the term load on top.
A new and important feature of the 1973 Convention was the concept of "special areas" which are considered to be so vulnerable to pollution by oil that oil discharges within them have been completely prohibited, with minor and well defined exceptions. The 1973 Convention identified the Mediterranean Sea, the Black Sea, and the Baltic Sea, the Red Sea and the Gulfs area as special areas. All oil carrying ships are required to be capable of operating the method of retaining oily wastes on board through the "load on top" system or for discharge to shore reception facilities.
This involves the fitting of appropriate equipment, including an oil discharge monitoring and control system, oily water separating equipment and a filtering system, slop tanks, sludge tanks, piping and pumping arrangements.
New oil tankers (i.e. those for which the building contract was placed after 31 December 1975) of 70,000 tons deadweight and above, must be fitted with segregated ballast tanks large enough to provide adequate operating draught without the need to carry ballast water in cargo oil tanks.
Secondly, new oil tankers are required to meet certain subdivision and damage stability requirements so that, in any loading conditions, they can survive after damage by collision or stranding.
The Protocol of 1978 made a number of changes to Annex I of the parent convention. Segregated ballast tanks (SBT) are required on all new tankers of 20,000 dwt and above (in the parent convention SBTs were only required on new tankers of 70,000 dwt and above). The Protocol also required SBTs to be protectively located that is, they must be positioned in such a way that they will help protect the cargo tanks in the event of a collision or grounding.
Another important innovation concerned crude oil washing (COW), which had been developed by the oil industry in the 1970s and offered major benefits. Under COW, tanks are washed not with water but with crude oil the cargo itself. COW was accepted as an alternative to SBTs on existing tankers and is an additional requirement on new tankers.
For existing crude oil tankers (built before entry into force of the Protocol) a third alternative was permissible for a period of two to four years after entry into force of MARPOL 73/78. The dedicated clean ballast tanks (CBT) system meant that certain tanks are dedicated solely to the carriage of ballast water. This was cheaper than a full SBT system since it utilized existing pumping and piping, but when the period of grace has expired other systems must be used.
Drainage and discharge arrangements were also altered in the Protocol, regulations for improved stripping systems were introduced.
Some oil tankers operate solely in specific trades between ports which are provided with adequate reception facilities. Some others do not use water as ballast. The TSPP Conference recognized that such ships should not be subject to all MARPOL requirements and they were consequently exempted from the SBT, COW and CBT requirements. It is generally recognized that the effectiveness of international conventions depends upon the degree to which they are obeyed and this in turn depends largely upon the extent to which they are enforced. The 1978 Protocol to MARPOL therefore introduced stricter regulations for the survey and certification of ships.
The 1992 amendments to Annex I made it mandatory for new oil tankers to have double hulls – and it brought in a phase-in schedule for existing tankers to fit double hulls.

Annex II: Control of pollution by noxious liquid substances
Entry into force: 6 April 1987
Annex II details the discharge criteria and measures for the control of pollution by noxious liquid substances carried in bulk.
Some 250 substances were evaluated and included in the list appended to the Convention. The discharge of their residues is allowed only to reception facilities until certain concentrations and conditions (which vary with the category of substances) are complied with.
In any case, no discharge of residues containing noxious substances is permitted within 12 miles of the nearest land. More stringent restrictions applied to the Baltic and Black Sea areas.
Annex III: Prevention of pollution by harmful substances in packaged form
Entry into force: 1 July 1992
The first of the convention's optional annexes. States ratifying the Convention must accept Annexes I and II but can choose not to accept the other three - hence they have taken much longer to enter into force.

Annex III contains general requirements for the issuing of detailed standards on packing, marking, labelling, documentation, stowage, quantity limitations, exceptions and notifications for preventing pollution by harmful substances.
The International Maritime Dangerous Goods (IMDG) Code has, since 1991, included marine pollutants.


Annex IV: Prevention of pollution by sewage from ships
Entry into force: 27 September 2003
The second of the optional Annexes, Annex IV contains requirements to control pollution of the sea by sewage.

Annex V: Prevention of pollution by garbage from ships
Entry into force: 31 December 1988
This deals with different types of garbage and specifies the distances from land and the manner in which they may be disposed of. The requirements are much stricter in a number of "special areas" but perhaps the most important feature of the Annex is the complete ban imposed on the dumping into the sea of all forms of plastic.

Annex VI: Prevention of Air Pollution from Ships
Adopted September 1997
Entry into force: 12 months after being ratified by 15 States whose combined fleets of merchant shipping constitute at least 50% of the world fleet.
Status: See status of conventions
The regulations in this annex, when they come into force, will set limits on sulphur oxide and nitrogen oxide emissions from ship exhausts and prohibit deliberate emissions of ozone depleting substances.
See 1997 amendments

Enforcement
Any violation of the MARPOL 73/78 Convention within the jurisdiction of any Party to the Convention is punishable either under the law of that Party or under the law of the flag State. In this respect, the term "jurisdiction" in the Convention should be construed in the light of international law in force at the time the Convention is applied or interpreted.
With the exception of very small vessels, ships engaged on international voyages must carry on board valid international certificates which may be accepted at foreign ports as prima facie evidence that the ship complies with the requirements of the Convention.
If, however, there are clear grounds for believing that the condition of the ship or its equipment does not correspond substantially with the particulars of the certificate, or if the ship does not carry a valid certificate, the authority carrying out the inspection may detain the ship until it is satisfied that the ship can proceed to sea without presenting unreasonable threat of harm to the marine environment.
Under Article 17, the Parties to the Convention accept the obligation to promote, in consultation with other international bodies and with the assistance of UNEP, support for those Parties which request technical assistance for various purposes, such as training, the supply of equipment, research, and combating pollution.
Amendment Procedure
Amendments to the technical Annexes of MARPOL 73/78 can be adopted using the "tacit acceptance" procedure, whereby the amendments enter into force on a specified date unless an agreed number of States Parties object by an agreed date.
In practice, amendments are usually adopted either by IMO's Marine Environment Protection Committee (MEPC) or by a Conference of Parties to MARPOL.

The 1984 amendments
Adoption: 7 September 1984
Entry into force: 7 January 1986
The amendments to Annex I were designed to make implementation easier and more effective. New requirements were designed to prevent oily water being discharged in special areas, and other requirements were strengthened. But in some cases they were eased, provided that various conditions were met: some discharges were now permitted below the waterline, for example, which helps to cut costs by reducing the need for extra piping.

The 1985 (Annex II) amendments
Adoption: 5 December 1985
Entry into force: 6 April 1987
The amendments to Annex II, which deals with liquid noxious substances (such as chemicals), were intended to take into account technological developments since the Annex was drafted in 1973 and to simplify its implementation. In particular, the aim was to reduce the need for reception facilities for chemical wastes and to improve cargo tank stripping efficiencies.
The amendments also made the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code) mandatory for ships built on or after 1 July 1986. This is important because the Annex itself is concerned only with discharge procedures: the Code contains carriage requirements. The Code itself was revised to take into account anti pollution requirements and therefore make the amended Annex more effective in reducing accidental pollution

The 1985 (Protocol I) amendments
Adoption: 5 December 1985
Entry into force: 6 April 1987
The amendments made it an explicit requirement to report incidents involving discharge into the sea of harmful substances in packaged form.

The 1987 Amendments
Adoption: December 1987
Entry into force: 1 April 1989
The amendments extended Annex I Special Area status to the Gulf of Aden

The 1989 (March) amendments
Adoption: March 1989
Entry into force: 13 October 1990
The amendments affected the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code), mandatory under both MARPOL 73/78 and SOLAS and applies to ships built on or after 1 July 1986 and the Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (BCH). In both cases, the amendments included a revised list of chemicals. The BCH Code is mandatory under MARPOL 73/78 but voluntary under SOLAS 1974.
Further amendments affected Annex II of MARPOL - updating and replacing the lists of chemicals in appendices II and III.

The October 1989 amendments
Adoption: 17 October 1989
Entry into force: 18 February 1991
The amendments make the North Sea a "special area" under Annex V of the convention. This greatly increases the protection of the sea against the dumping of garbage from ships

The 1990 (HSSC) amendments
Adoption: March 1990
Entry into force: 3 February 2000 (Coinciding with the entry into force of the 1988 SOLAS and Load Lines Protocols.
The amendments are designed to introduce the harmonized system of survey and certificates (HSSC) into MARPOL 73/78 at the same time as it enters into force for the SOLAS and Load Lines Conventions.
All three instruments require the issuing of certificates to show that requirements have been met and this has to be done by means of a survey which can involve the ship being out of service for several days.
The harmonized system alleviates the problems caused by survey dates and intervals between surveys which do not coincide, so that a ship should no longer have to go into port or repair yard for a survey required by one convention shortly after doing the same thing in connection with another instrument.

The 1990 (IBC Code) amendments
Adoption: March 1990
Entry into force: On the same date as the March 1990 HSSC amendments i.e. 3 February 2000.
The amendments introduced the HSSC into the IBC Code

The 1990 (BCH) amendments
Adoption: March 1990
Entry into force: On the same date as the March 1990 HSSC amendments i.e. 3 February 2000.
The amendments introduced the HSSC into the BCH Code.

The 1990 (Annexes I and V) amendments
Adoption: November 1990
Entry into force: 17 March 1992
The amendments extended Special Area Status under Annexes I and V to the Antarctic.

The 1991 amendments
Adoption: 4 July 1991
Entry into force: 4 April 1993
The amendments made the Wider Caribbean a Special Area under Annex V.
Other amendments added a new chapter IV to Annex I, requiring ships to carry an oil pollution emergency plan.

The 1992 amendments
Adoption: 6 March 1992
Entry into force: 6 July 1993
The amendments to Annex I of the convention which deals with pollution by oil brought in the "double hull" requirements for tankers, applicable to new ships (tankers ordered after 6 July 1993, whose keels were laid on or after 6 January 1994 or which are delivered on or after 6 July 1996) as well as existing ships built before that date, with a phase-in period.
New-build tankers are covered by Regulation 13F, while regulation 13G applies to existing crude oil tankers of 20,000 dwt and product carriers of 30,000 dwt and above. Regulation 13G came into effect on 6 July 1995.
Regulation 13F requires all new tankers of 5,000 dwt and above to be fitted with double hulls separated by a space of up to 2 metres (on tankers below 5,000 dwt the space must be at least 0.76m).
As an alternative, tankers may incorporate the "mid deck" concept under which the pressure within the cargo tank does not exceed the external hydrostatic water pressure. Tankers built to this design have double sides but not a double bottom. Instead, another deck is installed inside the cargo tank with the venting arranged in such a way that there is an upward pressure on the bottom of the hull.
Other methods of design and construction may be accepted as alternatives "provided that such methods ensure at least the same level of protection against oil pollution in the event of a collision or stranding and are approved in principle by the Marine Environment Protection Committee based on guidelines developed by the Organization.
For oil tankers of 20,000 dwt and above new requirements were introduced concerning subdivision and stability.
The amendments also considerably reduced the amount of oil which can be discharged into the sea from ships (for example, following the cleaning of cargo tanks or from engine room bilges). Originally oil tankers were permitted to discharge oil or oily mixtures at the rate of 60 litres per nautical mile. The amendments reduced this to 30 litres. For non tankers of 400 grt and above the permitted oil content of the effluent which may be discharged into the sea is cut from 100 parts per million to 15 parts per million.
Regulation 24(4), which deals with the limitation of size and arrangement of cargo tanks, was also modified.
Regulation 13G applies to existing crude oil tankers of 20,000 dwt and product carriers of 30,000 dwt and above.
Tankers that are 25 years old and which were not constructed according to the requirements of the 1978 Protocol to MARPOL 73/78 have to be fitted with double sides and double bottoms. The Protocol applies to tankers ordered after 1 June 1979, which were begun after 1 January 1980 or completed after 1 June 1982. Tankers built according to the standards of the Protocol are exempt until they reach the age of 30.
Existing tankers are subject to an enhanced programme of inspections during their periodical, intermediate and annual surveys. Tankers that are five years old or more must carry on board a completed file of survey reports together with a conditional evaluation report endorsed by the flag Administration.
Tankers built in the 1970s which are at or past their 25th must comply with Regulation 13F. If not, their owners must decide whether to convert them to the standards set out in regulation 13F, or to scrap them.
Another set of tankers built according to the standards of the 1978 protocol will soon be approaching their 30th birthday - and the same decisions must be taken.

The 1994 amendments
Adoption: 13 November 1994
Entry into force: 3 March 1996
The amendments affect four of the Convention's five technical annexes (II III, V, and I) and are all designed to improve the way it is implemented. They make it possible for ships to be inspected when in the ports of other Parties to the Convention to ensure that crews are able to carry out essential shipboard procedures relating to marine pollution prevention. These are contained in resolution A.742 (18), which was adopted by the IMO Assembly in November 1993.
The amendments are similar to those made to SOLAS in May 1994. Extending port State control to operational requirements is seen as an important way of improving the efficiency with which international safety and anti-pollution treaties are implemented.

The 1995 amendments
Adoption: 14 September 1995
Entry into force: 1 July 1997
The amendments concern Annex V. They are designed to improve the way the Convention is implemented. Regulation 2 was clarified and a new regulation 9 added dealing with placards, garbage management plans and garbage record keeping.

The 1996 amendments
Adoption: 10 July 1996
Entry into force: 1 January 1998
One set of amendments concerned Protocol I to the Convention which contains provisions for reporting incidents involving harmful substances. The amendments included more precise requirements for the sending of such reports.
Other amendments brought requirements in MARPOL concerning the IBC and BCH Codes into line with amendments adopted to SOLAS.

The 1997 amendments
Adoption: 23 September 1997
Entry into force: 1 February 1999
Regulation 25A to Annex 1 specifies intact stability criteria for double hull tankers.
Another amendment made the North West European waters a "special area" under Regulation 10 of Annex 1. The waters cover the North Sea and its approaches, the Irish Sea and its approaches, the Celtic Sea, the English Channel and its approaches and part of the North East Atlantic immediately to the West of Ireland.
In special areas, discharge into the sea of oil or oily mixture from any oil tanker and ship over 400 gt is prohibited. Other special areas already designated under Annex I of MARPOL include: the Mediterranean Sea area, the Baltic Sea area, the Red Sea area, the Gulf of Aden area and the Antarctic area.

The Protocol of 1997 (Annex VI - Regulations for the Prevention of Air Pollution from Ships)
Adoption: 26 September 1997
Entry into force: 12 months after being accepted by at least 15 states with not less than 50% of world merchant shipping tonnage (The Conference also adopted a Resolution which invites IMO's Marine Environment Protection Committee (MEPC) to identify any impediments to entry into force of the Protocol, if the conditions for entry into force have not been met by 31 December 2002).
Status: see Status of conventions
The Protocol was adopted at a Conference held from 15 to 26 September 1997 and adds a new Annex VI on Regulations for the Prevention of Air Pollution from Ships to the Convention.
The rules, when they come into force, will set limits on sulphur oxide (SOx) and nitrogen oxide (NOx) emissions from ship exhausts and prohibit deliberate emissions of ozone depleting substances.
The new Annex VI includes a global cap of 4.5% m/m on the sulphur content of fuel oil and calls on IMO to monitor the worldwide average sulphur content of fuel once the Protocol comes into force.
Annex VI contains provisions allowing for special "SOx Emission Control Areas" to be established with more stringent control on sulphur emissions. In these areas, the sulphur content of fuel oil used on board ships must not exceed 1.5% m/m. Alternatively, ships must fit an exhaust gas cleaning system or use any other technological method to limit SOx emissions.
The Baltic Sea is designated as a SOx Emission Control area in the Protocol.
Annex VI prohibits deliberate emissions of ozone depleting substances, which include halons and chlorofluorocarbons (CFCs). New installations containing ozone-depleting substances are prohibited on all ships. But new installations containing hydro-chlorofluorocarbons (HCFCs) are permitted until 1 January 2020.
The requirements of the IMO Protocol are in accordance with the Montreal Protocol of 1987, as amended in London in 1990. The Montreal Protocol is an international environmental treaty, drawn up under the auspices of the United Nations, under which nations agreed to cut CFC consumption and production in order to protect the ozone layer.
Annex VI sets limits on emissions of nitrogen oxides (NOx) from diesel engines. A mandatory NOx Technical Code, developed by IMO, defines how this is to be done.
The Annex also prohibits the incineration on board ship of certain products, such as contaminated packaging materials and polychlorinated biphenyls (PCBs).
Format of Annex VI
Annex VI consists of three Chapters and a number of Appendices:
• Chapter 1 - General
• Chapter II - Survey, Certification and Means of Control
• Chapter III - Requirements for Control of Emissions from Ships
• Appendices including the form of the International Air Pollution Prevention Certificate; criteria and procedures for designation of SOx emission control areas; information for inclusion in the bunker delivery note; approval and operating limits for shipboard incinerators; test cycles and weighting factors for verification of compliance of marine diesel engines with the NOx limits; and details of surveys and inspections to be carried out.

The 1999 amendments
Adoption: 1 July 1999
Entry into force: 1 January 2001 (under tacit acceptance)
Amendments to Regulation 13G of Annex I (Regulations for the Prevention of Pollution by Oil) make existing oil tankers between 20,000 and 30,000 tons deadweight carrying persistent product oil, including heavy diesel oil and fuel oil, subject to the same construction requirements as crude oil tankers.
Regulation 13G requires, in principle, existing tankers to comply with requirements for new tankers in Regulation 13F, including double hull requirements for new tankers or alternative arrangements, not later than 25 years after date of delivery.
The amendments extend the application from applying to crude oil tankers of 20,000 tons deadweight and above and product carriers of 30,000 tons deadweight and above, to also apply to tankers between 20,000 and 30,000 tons deadweight which carry heavy diesel oil or fuel oil.
The aim of the amendments is to address concerns that oil pollution incidents involving persistent oils are as severe as those involving crude oil, so regulations applicable to crude oil tankers should also apply to tankers carrying persistent oils.
Related amendments to the Supplement of the IOPP (International Oil Pollution Prevention) Certificate, covering in particular oil separating/filtering equipment and retention and disposal of oil residues were also adopted.
A third MARPOL 73/78 amendment adopted relates to Annex II of MARPOL Regulations for the Control of Pollution by Noxious Liquid Substances in Bulk. The amendment adds a new regulation 16 requiring a Shipboard marine pollution emergency plan for noxious liquid substances.
Amendments were also made to the International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk (IBC Code) and the Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk (BCH Code). The amendments address the maintenance of venting systems,

The 2000 amendments
Adoption: 13 March 2000
Entry into force: 1 January 2002 (under tacit acceptance)
The amendment to Annex III (Prevention of Pollution by Harmful Substances Carried by Sea in Packaged Form) deletes tainting as a criterion for marine pollutants from the Guidelines for the identification of harmful substances in packaged form. Tainting refers to the ability of a product to be taken up by an organism and thereby affect the taste or smell of seafood making it unpalatable. A substance is defined as tainting when it has been found to taint seafood.
The amendment means that products identified as being marine pollutants solely on the basis of their tainting properties will no longer be classified as marine pollutants.

The 2001 amendments
Adoption: 27 April 2001
Entry into force: 1 September 2002
The amendment to Annex I brings in a new global timetable for accelerating the phase-out of single-hull oil tankers. The timetable will see most single-hull oil tankers eliminated by 2015 or earlier. Double-hull tankers offer greater protection of the environment from pollution in certain types of accident. All new oil tankers built since 1996 are required to have double hulls.
The revised regulation identifies three categories of tankers, as follows:
"Category 1 oil tanker" means oil tankers of 20,000 tons deadweight and above carrying crude oil, fuel oil, heavy diesel oil or lubricating oil as cargo, and of 30,000 tons deadweight and above carrying other oils, which do not comply with the requirements for protectively located segregated ballast tanks (commonly known as Pre-MARPOL tankers).
"Category 2 oil tanker" means oil tankers of 20,000 tons deadweight and above carrying crude oil, fuel oil, heavy diesel oil or lubricating oil as cargo, and of 30,000 tons deadweight and above carrying other oils, which do comply with the protectively located segregated ballast tank requirements (MARPOL tankers), while
"Category 3 oil tanker" means an oil tanker of 5,000 tons deadweight and above but less than the tonnage specified for Category 1 and 2 tankers.
Although the new phase-out timetable sets 2015 as the principal cut-off date for all single-hull tankers, the flag state administration may allow for some newer single hull ships registered in its country that conform to certain technical specifications to continue trading until the 25th anniversary of their delivery.
However, under the provisions of paragraph 8(b), any Port State can deny entry of those single hull tankers which are allowed to operate until their 25th anniversary to ports or offshore terminals. They must communicate their intention to do this to IMO.
As an additional precautionary measure, a Condition Assessment Scheme (CAS) will have to be applied to all Category 1 vessels continuing to trade after 2005 and all Category 2 vessels after 2010.
Although the CAS does not specify structural standards in excess of the provisions of other IMO conventions, codes and recommendations, its requirements stipulate more stringent and transparent verification of the reported structural condition of the ship and that documentary and survey procedures have been properly carried out and completed.
The requirements of the CAS include enhanced and transparent verification of the reported structural condition and of the ship and verification that the documentary and survey procedures have been properly carried out and completed. The Scheme requires that compliance with the CAS is assessed during the Enhanced Survey Programme of Inspections concurrent with intermediate or renewal surveys currently required by resolution A.744(18), as amended.